MITUTOYO Micrometers

?* Information on days to ship and prices

• 

  Interchangeable Ball Anvil/Spindle Tip

  MITUTOYO

  These optional interchangeable anvils allow you to measure the over-pin diameter of gears.

  Starting from∗ ：	152.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	75.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Medium-sized Standard, with Clamp Nut

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefit:
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	67.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spline Micrometer, Inch

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with a spindle and anvil reduced in diameter to enable measurement within slotted features, such as keyways. A ratchet stop guarantees repeatable measurement. High resolution provided by a vernier scale on sleeve.

  Starting from∗ ：	243.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit Borematic Series 568, Metric

  MITUTOYO

  Starting from∗ ：	1,234.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit EC-Counter

  MITUTOYO

  This Digimatic display can be connected to any device with Digimatic output, including micrometers, indicators, calipers and LGS/LGD Linear Gauge.
  It offers you the following benefits:
  - It has a data output and tolerance evaluation function.

  Starting from∗ ：	517.11 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Micro Jack

  MITUTOYO

  A Mitutoyo height-adjustable support for accurate levelling of small machines, surface plates, and similar equipment. Easily adjusted under heavy load.

  Starting from∗ ：	504.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Stand, Adjustable Angle Type

  MITUTOYO

  These Mitutoyo stands are designed to allow bench-top use of hand micrometers or other gauges which have frames suitable for gripping by the clamp.

  Starting from∗ ：	70.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  3-Wire Thread Measuring

  MITUTOYO

  The measuring wires are hardened and precision lapped. They are placed onto spindle and anvil of outside micrometer. The three-wire measuring process is applied to determine the pitch diameter of threads and considered as one of the most accurate measuring procedures.

  Starting from∗ ：	240.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Crimp Height Micrometer

  MITUTOYO

  A Mitutoyo non-digital micrometer provided with pointed spindle to enable measurement of the crimp height of electrical contacts. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	301.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Caliper Jaw Micrometer

  MITUTOYO

  Starting from∗ ：	915.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Crimp Height Micrometer QuickMike

  MITUTOYO

  This Crimp Height Micrometer that features a flat anvil and pointed spindle offers you the following benefits:
  - It allows you to measure the crimped height of electrical contacts.
  - Excellent resistance against water and dust (IP65 protection level).

  Starting from∗ ：	1,478.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer Head, Non-rotating Spindle

  MITUTOYO

  A Mitutoyo digital, non-rotating spindle micrometer head with plain stem and flat spindle tip. The display is rotatable for viewing convenience. Digimatic data output.

  Starting from∗ ：	953.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Sheet Metal Micrometer

  MITUTOYO

  This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.

  Starting from∗ ：	1,330.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Holtest Internal Micrometer, Series 368

  MITUTOYO

  This is a set of three-point and two-point internal micrometers that offers you the following benefits:
  - Complete unit set
  - Carbide measuring surface
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - Delivered with setting rings and extension rod.

  Starting from∗ ：	384.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Tip Set (Metric/UNF)

  MITUTOYO

  A set of matching Mitutoyo anvil and spindle tips to fit Series 126/326 Screw Thread Micrometers to cover the ranges 0.4-7 mm pitch Metric and 64-3.5 TPI Unified.

  Starting from∗ ：	414.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Locking Screw Type, with Clamp Nut

  MITUTOYO

  These micrometer heads feature a locking screw so you can lock the spindle in any position with the knurled locking screw.

  Starting from∗ ：	74.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Sheet Metal Micrometer Graduated Dial

  MITUTOYO

  This Sheet Metal Micrometer comes with a graduated dial.
  It offers you the following features:
  - A deep frame that enables you to measure the thickness of sheet material.
  - Easy-to-read graduated dial.

  Starting from∗ ：	376.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digit Outside Micrometer

  MITUTOYO

  This Digit Outside Micrometer comes with a mechanical counter and offers you the following benefits:
  - Mechanical Digit counter
  - Quick and easy reading

  Starting from∗ ：	155.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital 3-Point Internal Micrometer Set

  MITUTOYO

  These are three-point internal micrometers that offer you the following benefits:
  - Interchangeable head set.
  - Titanium-coated measuring pins give you excellent durability and impact resistance.
  - They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splashing coolant fluid.
  - Large LCD display with character height of 7.5 mm enables you to read measurements easily.
  - With setting rings and extensions.

  Starting from∗ ：	1,853.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Absolute Micrometer QuickMike

  MITUTOYO

  This Quickmike, with a non-rotating spindle, delivers much faster movement than standard models.
  The ABSOLUTE Digimatic Micrometer Quickmike offers the following benefits:
  - With 10 mm feed per thimble rotation, it delivers twenty times as fast as standard devices.
  - Excellent resistance against water and dust (IP65) enables this micrometer to be used in machining situations that include splashing coolant fluid.
  - ABSOLUTE linear scale means no restriction on adjustment speed.
  - Larger measuring range - 30 mm compared with 25 mm - than standard micrometer.

  Starting from∗ ：	499.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer Head, Inch/Metric

  MITUTOYO

  A Mitutoyo digital, non-rotating spindle micrometer head with plain 0.71 inch stem and flat spindle tip. The display is rotatable for viewing convenience. Digimatic data output.

  Starting from∗ ：	953.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Screw Thread Micrometer IP65, Series 326

  MITUTOYO

  This Digimatic Screw Thread Micrometer should be used with optional, interchangeable, anvils/spindle-tips that allow you to measure a wide range of metric/unified and Whitworth screw-thread pitch diameters. A metric (unified) 60º setting standard is included with all models except those measuring range from 0-25 mm.

  Starting from∗ ：	874.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Sheet Metal Micrometer, Inch

  MITUTOYO

  A Mitutoyo waterproof digital micrometer suitable for use in the presence of coolant or cutting oil. The extra-deep frame (305 mm/12 inch) enables measurement of sheet metal thickness farther from the edge of a sheet than is possible with a standard deep-frame micrometer. A ratchet stop guarantees repeatable measurement. Digimatic data output.

  Starting from∗ ：	1,330.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Display Unit Borematic Series 568, Inch/Metric

  MITUTOYO

  Starting from∗ ：	1,234.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  High Accuracy Digital Micrometer

  MITUTOYO

  This Micrometer enables 0.1 μm resolution measurements and is ideal for customers who need to make highly accurate measurements with a hand-held tool (such as Gauge R & R analysis).
  The Absolute High-Accuracy Micrometer offers the following benefits:
  - It delivers higher accuracy without sacrificing operability, by using Mitutoyo‘s innovative 0.1 μm resolution ABS (absolute) rotary sensor and high accuracy screw machining technology which reduces instrumental error to just 0.5 μm.
  - Its highly rigid frame and high-performance constant-force mechanism (7-9 N) enable more stable measurement.

  Starting from∗ ：	2,006.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Interchangeable Tip Set (Whitworth)

  MITUTOYO

  A set of matching Mitutoyo anvil and spindle tips to fit Series 126/326 Screw Thread Micrometers to cover the range 60-3.5 TPI Whitworth.

  Starting from∗ ：	886.84 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Micrometer Head

  MITUTOYO

  These micrometer heads have a very fine spindle.
  They offer the following benefits:
  - Small size micrometer heads with extremely fine pitch of 0.1 mm
  - Ideal for fine adjustment applications in scientific apparatus

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head Zero Adjustable, with Clamp Nut

  MITUTOYO

  These are a standard type of small size micrometer heads with a zero-adjustable thimble.
  They offer the following benefits:
  - You can make a zero-setting at any position by loosening the setscrew in the thimble.

  Starting from∗ ：	95.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Head, Medium-sized Standard

  MITUTOYO

  These micrometer heads are a medium-sized, standard type.
  They offer the following benefits:
  - 8 mm diameter spindle
  - Extremely sturdy micrometer head with or without a ratchet.

  Starting from∗ ：	63.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Micrometer Spanner

  MITUTOYO

  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Outside Micrometer Set

  MITUTOYO

  Cut-away frame behind anvil for measuring in hard to reach places. A ratchet stop or friction thimble guarantees repeatable measurement.

  Starting from∗ ：	417.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Blade Micrometer QuickMike

  MITUTOYO

  This ABSOLUTE Digimatic Blade Micrometer Quickmike is designed to help you measure hard-to-reach features.
  It offers the following benefits:
  - Blade-shaped anvil and spindle for measuring the groove diameter of shafts, keyways and other hard-to reach features
  - Non-rotating spindle
  - Fast spindle feed of 10 mm/revolution

  Starting from∗ ：	1,017.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Absolute Digital Disc Micrometer, Adjustable Force

  MITUTOYO

  The ABSOLUTE Digimatic Disc Micrometer Quickmike allows you to measure with a fast spindle feed of 10 mm per thimble rotation.
  It offers you the following benefits:
  - Suitable for measuring felt, rubber, cardboard, fabric etc.
  - Suitable to measure "root tangent length" of spur gears and helical gears.
  - With a non-rotating spindle and disc-shaped measuring surface.
  - Measuring force is adjustable for various kinds of workpieces (series 227)

  Starting from∗ ：	1,387.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Caliper Jaw Inside Micrometer

  MITUTOYO

  The Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Gauge Micrometer

  MITUTOYO

  This Dial Gauge Micrometer allows you to quickly measure mass-produced parts.
  It offers the following benefits:
  - Designed to mount a dial or a Digital indicator for direct GO/NG judgement of mass-produced parts.
  - You can take rapid measurements thanks to its anvil retracting trigger.
  - 3 mm anvil retracting stroke

  Starting from∗ ：	443.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Dial Snap Gauge without Indicator, Inch

  MITUTOYO

  A Mitutoyo dial snap gauge designed for quick GO/NG judgement of diameters of cylinders and shafts. Anvils are chamfered for easy workpiece insertion. The dial indicator is optional, enabling the user to choose from the wide range available to best suit the application.

  Starting from∗ ：	507.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Dial Snap Meter, Inch

  MITUTOYO

  A Mitutoyo rapid-retraction-anvil snap meter equipped with a high resolution dial indicator.

  Starting from∗ ：	714.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digit Micrometer Head

  MITUTOYO

  This Digit counter type is a micrometer head with a mechanical counter.

  Starting from∗ ：	214.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Measuring Head Holtest/Borematic

  MITUTOYO

  Starting from∗ ：	299.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Inside Micrometer Caliper Type

  MITUTOYO

  The Digimatic Caliper Jaw Inside Micrometer offers you the following benefits:
  - Carbide measuring faces
  - A setting standard (optional) is needed to accurately set the micrometer to the reference point.

  Starting from∗ ：	915.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer Head, with Clamp Nut

  MITUTOYO

  This Micrometer Head offers the following benefits:
  - You can integrate it into machinery and measuring instruments.
  - Measurement values are clearly displayed in 0.001mm increments.
  - Stem diameter: 10 mm

  Starting from∗ ：	529.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer IP65, Inch/Metric, Friction Thimble

  MITUTOYO

  A Mitutoyo waterproof digital micrometer suitable for use in the presence of coolant or cutting oil. The highly stable frame incorporates a heat shield to preserve accuracy over extended measuring sessions. A ratchet stop guarantees repeatable measurement.

  Starting from∗ ：	277.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Micrometer QuantuMike IP65

  MITUTOYO

  This is an IP65 micrometer offering movement four times as fast as a standard micrometer.

  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  External Dial Caliper Gauge

  MITUTOYO

  This analog External Dial Caliper Gauge offers you the following benefits:
  - Excellent resistance against water and dust (IP65 protection level)
  - Optimized measuring force
  - Ergonomically designed to lie securely in your hand when measuring

  Starting from∗ ：	589.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...