OSG Screw-Hole-Related Tools（Page 2）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Electrodeposition Diamond Tool for Grinding Centering, Seratap, ED-PNT
OSG
[Features]
-The tool attached to the pilot hole shaft performs a self-rotating and orbital motion to grind a thread with a pitch.
-The X, Y and Z axes are fed simultaneously, so the requirement for use is that the machine is equipped with a 3-axis simultaneous control mechanism.Starting from∗ ： 115.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Starting from∗ ： 15.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 106.33 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 14.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 94.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 101.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Starting from∗ ： 27.19 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 120.00 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
VPO-DC-MT Center, Powder metal straight flute cutting tap for through and blind holes, Metric Fine
OSG
For cast iron and aluminum cast - Synchro taps at cutting speeds > 30 m/min, with center through coolantStarting from∗ ： 63.30 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
V-TI-SFT, Powder metal low spiral-fluted cutting tap for blind holes, UNJC
OSG
[Specifications]
・Powder metal low spiral-fluted cutting tap for blind holes
・Multilayer TiCN coating
・For Titanium alloys
・UNJCStarting from∗ ： 58.90 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
S-SFT, HSSE spiral-fluted cutting tap for blind holes, UNF
OSG
General purpose tapping in steels and stainless steelsStarting from∗ ： 27.00 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
VA-SFT, HSSE spiral-fluted cutting tap for blind holes, G (BSP)
OSG
General purpose tapping in steels and stainless steelsStarting from∗ ： 43.80 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
VP-H-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Metric
OSG
For hardened steels up to 45 HRCStarting from∗ ： 39.10 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-M
OSG
For general steels, stainless steels, aluminum - Developed for rigid tapping on CNC machines - For thread insertStarting from∗ ： 31.60 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-UNJF
OSG
For general steels, stainless steels, aluminum - Developed for rigid tapping on CNC machines - For thread insertStarting from∗ ： 45.10 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
H-SFT, Powder metal low spiral-fluted cutting tap for blind holes, UNJF
OSG
For hardened steels up to 45 HRCStarting from∗ ： 57.00 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
SH-SFT, HSSE low spiral-fluted cutting tap for blind holes, G (BSP)
OSG
For alloyed steels ≥ 1100N/mm² - Short chip creationStarting from∗ ： 36.30 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
VA-POT, HSSE spiral-point cutting tap for through holes, UNJF
OSG
General purpose tapping in steels and stainless steelsStarting from∗ ： 34.70 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
CPM-POT, Powder metal spiral-point cutting tap for through holes
OSG
For steels up to 900 N/mm² and cast ironStarting from∗ ： 26.40 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
E-HL-POT, Powder metal spiral-point cutting tap for through holes, Helicoil EG-UNJC
OSG
For Nickel-based alloys including Inconel 718 - For thread insertStarting from∗ ： 51.90 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
E-POT, Powder metal spiral-point cutting tap for through holes, UNJF
OSG
For Nickel-based alloys including Inconel 718Starting from∗ ： 41.10 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
S-OIL-XPF FORM E, HSSE forming tap for through & blind holes, Metric Fine
OSG
For general steels, stainless steels and aluminum - Center through coolant, chamfer Form EStarting from∗ ： 82.50 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
S-XPF, HSSE forming tap for through & blind holes, Metric Fine
OSG
For general steels, stainless steels and aluminumStarting from∗ ： 55.70 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
S-XPF, HSSE forming tap for through & blind holes, UNC
OSG
For general steels, stainless steels and aluminumStarting from∗ ： 57.00 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
S-XPF, HSSE forming tap for through & blind holes, G (BSP)
OSG
For general steels, stainless steels and aluminumStarting from∗ ： 75.10 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
S-XPF +0.1, HSSE forming tap for through & blind holes, Metric
OSG
For general steels, stainless steels and aluminum - Oversized tap for 6H +0,1mm thread toleranceStarting from∗ ： 62.40 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
S-XPF-GL 6GX, HSSE forming tap for through & blind holes, Metric
OSG
For general steels, stainless steels and aluminum - Without oil grooves for higher rigidity, for 6G internal thread toleranceStarting from∗ ： 56.00 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
DIN 223B, HSS solid circular dies DIN223B, Metric
OSG
HSS solid circular dies DIN223B - Chamfer lead on both sidesStarting from∗ ： 43.90 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Starting from∗ ： 176.00 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
WX-ST-PNC-3P, Carbide thread milling cutter with 3 crest thread length, Metric & Metric Fine
OSG
Carbide thread milling cutter with 3 crest thread lenght - For all materials and hardened steels up to 50 HRCStarting from∗ ： 156.30 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT
OSG
Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.Starting from∗ ： 22.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT
OSG
Allows internal threading of stainless steel with a water soluble cutting fluid.
Tool material: Vanadium high speed steel
Hole type: For blind holes
Material: General steel/stainless steel.- Volume Discount
Starting from∗ ： 17.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT
OSG
In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)Starting from∗ ： 28.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT
OSG
When cutting aluminum (cast, rolled and forged) and other light alloys, this is suitable as a countermeasure for obstruction from metal shavings, or when the objective is extending the tap usage life.Starting from∗ ： 42.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert Screw Tap Series, Hand Tap HL-HT
OSG
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.- Volume Discount
Starting from∗ ： 12.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Starting from∗ ： 16.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Starting from∗ ： 23.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT
OSG
Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.Starting from∗ ： 17.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Aluminum, EX-AL-SFT
OSG
Suitable for tapping blind hole of nonferrous metal such as aluminum and its alloys, and die-cast- Volume Discount
Starting from∗ ： 15.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT
OSG
Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.- Volume Discount
Starting from∗ ： 13.15 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT
OSG
Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.- Volume Discount
Starting from∗ ： 10.88 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Starting from∗ ： 14.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Low Spiral LW-SFT
OSG
Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.- Volume Discount
Starting from∗ ： 9.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT
OSG
Suited for Drilling Blind Holes in Materials That Leave Coil Shaped Connected Cutting Debris Such as Carbon Steel, Alloyed Steel, and Non-Ferrous Metals- Volume Discount
Starting from∗ ： 8.78 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT
OSG
Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.Starting from∗ ： 32.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Electrodeposition Diamond Tool for Grinding Centering, Seratap, ED-PNT | Spiral Tap Series, General Purpose (Left Hand Thread), EX-SFT-L | Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT | Screw Cutting Round Die Series, Tapered Screw Cutting Round Solid Dies, TPD-S-NPT | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S | VPO-DC-MT Center, Powder metal straight flute cutting tap for through and blind holes, Metric Fine | V-TI-SFT, Powder metal low spiral-fluted cutting tap for blind holes, UNJC | VA-SFT, HSSE spiral-fluted cutting tap for blind holes, G (BSP) | VP-H-SFT, Powder metal low spiral-fluted cutting tap for blind holes, Metric | CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-M | CC-HL-SFT, HSSE spiral-fluted cutting tap for blind holes, Helicoil EG-UNJF | H-SFT, Powder metal low spiral-fluted cutting tap for blind holes, UNJF | SH-SFT, HSSE low spiral-fluted cutting tap for blind holes, G (BSP) | VA-POT, HSSE spiral-point cutting tap for through holes, UNJF | CPM-POT, Powder metal spiral-point cutting tap for through holes | E-HL-POT, Powder metal spiral-point cutting tap for through holes, Helicoil EG-UNJC | E-POT, Powder metal spiral-point cutting tap for through holes, UNJF | S-OIL-XPF FORM E, HSSE forming tap for through & blind holes, Metric Fine | S-XPF, HSSE forming tap for through & blind holes, Metric Fine | S-XPF +0.1, HSSE forming tap for through & blind holes, Metric | S-XPF-GL 6GX, HSSE forming tap for through & blind holes, Metric | WX-ST-PNC-3P, Carbide thread milling cutter with 3 crest thread length, Metric & Metric Fine | Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT | Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT | Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT | Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT | Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT | Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT | Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT | Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT | Spiral Tap Series, General Purpose Homogenization Treated EX-H-SFT | Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT | |||||||||||||
| Starting from∗ | 115.92 € *Unit price with basic configuration | 15.94 € *Unit price with basic configuration Volume Discount | 106.33 € Special price *Unit price with basic configuration Promotional pricing | 14.02 € *Unit price with basic configuration Volume Discount | 94.79 € *Unit price with basic configuration Volume Discount | 101.94 € *Unit price with basic configuration Volume Discount | 27.19 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 120.00 € *Unit price with basic configuration | 63.30 € *Unit price with basic configuration | 58.90 € *Unit price with basic configuration | 27.00 € *Unit price with basic configuration | 43.80 € *Unit price with basic configuration | 39.10 € *Unit price with basic configuration | 31.60 € *Unit price with basic configuration | 45.10 € *Unit price with basic configuration | 57.00 € *Unit price with basic configuration | 36.30 € *Unit price with basic configuration | 34.70 € *Unit price with basic configuration | 26.40 € *Unit price with basic configuration | 51.90 € *Unit price with basic configuration | 41.10 € *Unit price with basic configuration | 82.50 € *Unit price with basic configuration | 55.70 € *Unit price with basic configuration | 57.00 € *Unit price with basic configuration | 75.10 € *Unit price with basic configuration | 62.40 € *Unit price with basic configuration | 56.00 € *Unit price with basic configuration | 43.90 € *Unit price with basic configuration | 176.00 € *Unit price with basic configuration | 156.30 € *Unit price with basic configuration | 22.41 € *Unit price with basic configuration | 17.56 € *Unit price with basic configuration Volume Discount | 28.34 € *Unit price with basic configuration | 42.36 € *Unit price with basic configuration | 12.11 € *Unit price with basic configuration Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 23.77 € *Unit price with basic configuration Volume Discount | 17.33 € *Unit price with basic configuration | 15.96 € *Unit price with basic configuration Volume Discount | 13.15 € *Unit price with basic configuration Volume Discount | 10.88 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 14.52 € *Unit price with basic configuration Volume Discount | 9.50 € *Unit price with basic configuration Volume Discount | 8.78 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 32.98 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 2 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Screw Types | Other | Meter / Unified | Meter | Meter | Taper for Pipe | Taper for Pipe | Meter / Unified / Whitworth / Sewing Machine | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Meter | Meter | Meter | Meter | Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | - | 1/2-20UNF ～ M24 | M24 ～ M30 | M3 ～ M20 | NPT1 ～ NPT3/8 | NPT1/2 ～ NPT3/8 | 1UN ～ M48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | M4 ～ M8 | M2 ～ M24 | M8 | M8 | No8UN | M1.4 ～ M16 | M3 ～ M16 | M3 ～ M12 | M8 | M2 ～ M6 | M2.6 ～ M10 | M3 ～ M24 | M6 | M5 ～ M24 | M3 ～ M10 |
| Pitch (P), Number of Threading(mm) | 0.5 ～ 2 | 0.25 ～ 3 | 3 ～ 3.5 | 0.5 ～ 2.5 | 11.5 ～ 27 | 14 ～ 27 | 0.25 ～ 64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.7 ～ 1.25 | 0.4 ～ 3 | 1.25 | 1.25 | 32 | 0.3 ～ 2 | 0.5 ～ 2 | 0.5 ～ 1.75 | 1 | 0.4 ～ 1 | 0.45 ～ 1.5 | 0.5 ～ 3 | 1 | 0.8 ～ 3 | 0.5 ～ 1.5 |
| Chamfer threads (Lcf) | - | 5P | 2.5P | 5P | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5P | 2.5P | 5P | 2P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 3P |
| Tool Material Type | - | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy HSS | Alloy HSS | Alloy HSS | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| work material | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Nickel-based alloy (Inconel, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] | Nickel-based alloy (Inconel, etc.)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] |
| Tap Type | Thread-Cutting-Related Tool | Point tap | Spiral Tap | Point tap | Die | Die | Die | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Spiral Tap | Spiral Tap | Point tap | Roll tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
| Hole type | - | For through hole | For blind hole | For through hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole |
| Coating Y/N | - | Available | N/A | N/A | N/A | N/A | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | Available | Available | Available | N/A | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | Available |
| Coating Type | - | Other | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | TiN / CrN | Other | Non-Coated | Non-Coated | TiN | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN |
| Overall Length (L)(mm) | 50 ～ 80 | 34 ～ 120 | 120 ～ 135 | 100 ～ 150 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 52 ～ 70 | 40 ～ 120 | 70 | 150 | 60 | 34 ～ 95 | 100 ～ 150 | 46 ～ 82 | 70 | 40 ～ 62 | 44 ～ 75 | 100 ～ 150 | 62 | 60 ～ 120 | 100 ～ 150 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
-
Screw size (Nominal)
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- NO.12-28UNF
- NO.12-24UNC
- S0.2
- NO.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- S0.3
- NO.3-56UNF
- NO.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- S0.5
- NO.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-32UNC
- S0.7
- S0.8
- NO.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- G1"-3"
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- UNC 3
- UNF 3
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- M3 - M18
- SM3/32
- M3.5
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- UNC 5
- №5-40UNC
- 5/8UN
- G5/8
- G 5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- M5 - M12
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- UNC 6
- UNF 6
- UNJC 6
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8UN
- G7/8
- G 7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- EGM 8
- M8
- MF8
- No8UN
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- EGM 10
- M10
- MF10
- No10UN
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- SM11/32
- SM11/64
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- M15
- SM15/64
- M16
- MF16
- Mf16
- M16 x 1.5
- M17
- M18
- MF18
- M19
- M20
- MF20
- Mf20
- M20 x 1.5
- M21
- M22
- MF22
- M23
- M24
- MF24
- M25
- MF25
- Mf25
- M25 x 1.5
- M26
- MF26
- M27
- MF27
- M28
- MF28
- M30
- MF30
- M32
- Mf32
- M33
- M34
- M35
- M36
- M37
- M38
- M39
- M40
- M42
- M45
- M48
- M52
- M56
- M64
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (16)
- OSG (368)
- YAMAWA MFG (54)
- CARMEX (35)
- ESCO (25)
- TRUSCO NAKAYAMA (24)
- REX TOOLS (20)
- SANDVIK (13)
- ISHIHASHI (8)
- GEDORE (7)
- NACHI(FUJIKOSHI) (5)
- WERA (5)
- HAZET (4)
- NOGAJAPAN (4)
- SKC (4)
- TANOI MFG (4)
- GUHRING (3)
- RENNSTEIG (3)
- BAHCO (2)
- EIKOSHA (2)
- NS TOOL (2)
- RUKO (2)
- WIHA (2)
- FEIN (2)
- BERNSTEIN AG (1)
- ENGINEER (1)
- KANETEC (1)
- LIGHTSEIKI (1)
- MITSUTOMO (1)
- NEW STRONG (1)
- STAHLWILLE (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Metoda de plată
Plata în cont
Pre-plată
Producție la cerere
Certificate
Copyright © MISUMI Corporation Toate drepturile rezervate.