Guide Elements（Page 2）

?* Information on days to ship and prices

• 

  V-blocks, vertical (K0819)

  KIPP

  · Support and locating element for round workpieces
  
  · Contact faces ground and hardened
  
  · Detachable via reamed holes

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	168.07 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Workholding cubes, grey cast iron with T-slots (K0805)

  KIPP

  · Base element for system construction
  
  · Precision-fit T-slots for positioning and clamping
  
  · Precision-machined support and clamping faces
  
  · Suitable for DIN and JIS standard machine tables

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,504.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  V-blocks split LH (K0819)

  KIPP

  · Support and locating element for round workpieces
  
  · Contact faces ground and hardened
  
  · Detachable via reamed holes
  
  · Clamping of workpiece diameters from 50 mm to 600 mm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	381.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Wedge supports (K1945)

  KIPP

  · Vertical movement with no lateral shift.
  
  · Particularly suitable for marking out or machining heavy parts
  
  · Various optional attachments available

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	382.95 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tombstones window frame (K0804)

  KIPP

  Material:
  GJL 300
  
  Version:
  Reference surfaces precision machined
  
  Note:
  Tooling plates K0801 can be positioned and mounted on both sides of the window frame,
  permitting economical fixture changes. The window frames are positioned using centring
  pins K0856 and slot guide nuts.

  Select to compare

  Configure now
  Starting from∗ ：	1,277.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Columns for spring fingers (33262)

  NORELEM

  · For support of spring clamps

  Select to compare

  Configure now
  Starting from∗ ：	24.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Inspection blocks with column (31020)

  NORELEM

  · Material: granite (primary stone)
  
  · Wear resistance 3 times greater than with conventional granite
  
  · Density 20% higher than conventional granite
  
  · Three times less thermal expansion compared to conventional granite
  
  · Suitable for dial gauge holder 31140 & 31141

  Select to compare

  Configure now
  Starting from∗ ：	380.22 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Adjustable Rotating Elements

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・d(mm): 40, 70
  ・System: V40, V70
  
  T-Slot Systems Mounting Elements, Adjustable Rotating Elements EH 1048.600-EH 1148.600

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	763.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Base Jaws, soft

  HALDER

  Jaws of case hardened steel. For self-made special jaws. Please order mounting screws separately (Art. No. 1701.300). This product is supplied as a pair.

  Select to compare

  Configure now
  Starting from∗ ：	410.09 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Plates, semi-finished

  HALDER

  [Specifications]
  ・Material: Grey cast iron GG
  ・b1(mm): 400, 500, 630
  ・h(mm): 40.3, 50.3
  
  Base Plates, semi-finished EH 1912.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,116.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Base Plates, V70eco, overall dimensions same as pallets DIN 55201

  HALDER

  V70eco base plates are a further development of the established V70 product line, optimized in quality and price.
  They are fully compatible with the existing V70 T-slot System.
  • Centers to H6 tolerance and slots to H8 tolerance.
  • Alignment of the base plate on the machine table by means of centers and/or centering slot.
  • Fastening holes on a 100 mm pitch.
  • High tensile tool steel.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,409.42 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Base Plates, with positioning holes

  HALDER

  [Specifications]
  ・Material: Grey cast iron GG
  ・b1(mm): 400, 500, 630
  ・h(mm): 40, 50
  
  Base Plates, with positioning holes EH 1912.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,998.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Angles

  HALDER

  [Specifications]
  ・Material: Aluminium, Grey cast iron GG, Grey cast iron, phosphatized
  ・System: L12, L16, V40, V70

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	738.44 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Angles, modular design

  HALDER

  The modular clamping angle is a unit consisting of a support plate and two base plates.Assembly or disassembly is possible within a very short time.The base plates used correspond to the respective standard version.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8,795.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Angles, one-sided, welded, semi-finished

  HALDER

  [Specifications]
  ・Material: Steel, welded
  ・b(mm): 250, 330, 370
  ・h(mm): 450, 550, 650
  
  Clamping Angles, one-sided, welded, semi-finished EH 1910.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,602.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Angles, welded, semi-finished

  HALDER

  [Specifications]
  ・Material: Steel, welded
  ・h(mm): 475, 600, 725
  ・Suitable for: M12, M16
  
  Clamping Angles, welded, semi-finished EH 1910.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,029.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Angles, semi-finished

  HALDER

  [Specifications]
  ・Material: Grey cast iron GG
  ・a(mm): 150, 200, 300
  ・Suitable for: M12, M16
  
  Clamping Angles, semi-finished EH 1906.Threaded Lifting Pins, self-locking.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,125.04 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bars

  HALDER

  [Specifications]
  ・Material: Steel, blackened, Steel, case-hardened, ground
  ・l1(mm): 69~300
  ・Suitable for: M8, M12, M16

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Bars, length 100, 200, 300, 400 - 700

  HALDER

  [Specifications]
  ・Material: Tool steel, hardened
  ・l1(mm): 400~700
  ・Suitable for: M8, M12, M16
  
  Clamping Bars, length 100, 200, 300, 400 - 700

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	323.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Cubes, semi-finished

  HALDER

  [Specifications]
  ・Material: Grey cast iron GG
  ・a(mm): 150, 200
  ・Suitable for: M12, M16
  
  Clamping Cubes · semi-finished EH 1908.Threaded Lifting Pins, self-locking.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3,004.31 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Cubes, welded, semi-finished

  HALDER

  [Specifications]
  ・Material: Steel, welded
  ・a(mm): 150, 200
  ・Suitable for: M12, M16
  
  Clamping Cubes · welded, semi-finished EH 1910.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,824.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Heads

  HALDER

  [Specifications]
  ・Material: Steel, blackened
  ・System: L12, L16, V70
  ・Suitable for: M12, M16

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	116.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Jaws, for floating clamp M 12 / upper clamping jaw with location hole

  HALDER

  The clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.
  The upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.
  In the upper clamping jaw with female thread M 8 (23320.0154 / .0156 - picture 4 + 5) different standard parts can be screwed in as required.
  The lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	123.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Vices, fixed jaw

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・System: V70
  
  Clamping Vices · fixed jaw EH 1137.400

  Select to compare

  Configure now
  Starting from∗ ：	546.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Vices, moveable jaw

  HALDER

  Max. torque 140 Nm, Clamping power F = 30 kN.

  Select to compare

  Configure now
  Starting from∗ ：	982.58 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Vices, replacement jaw, ribbed / flat

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, blackened
  ・System: V70
  
  Clamping Vices, replacement jaw, ribbed / flat EH 1138.400

  Select to compare

  Configure now
  Starting from∗ ：	99.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping Vices, replacement jaw, soft

  HALDER

  [Specifications]
  ・Material: Aluminium
  ・System: V70
  
  Clamping Vices, replacement jaw, soft EH 1138.100

  Select to compare

  Configure now
  Starting from∗ ：	57.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Combination Clamping Bars

  HALDER

  The combination clamping bar offers 3 ways to clamp/support the workpiece:
  Floating mode
  Floating mode is used to clamp and support additional clamping points on components.
  Centric mode
  The jaws of the clamping bar move in sync. The centre axis of the workpiece remains unchanged even if the outer diameters are modified.
  Machine vice mode
  When this mode is selected, one of the jaws is locked in place on the clamping bar. The second jaw remains movable.

  Select to compare

  Configure now
  Starting from∗ ：	1,401.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Connecting Elements

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・System: V70
  
  Connecting Elements EH 1101.300-EH 1101.500

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,975.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Consoles

  HALDER

  [Specifications]
  ・Material: Grey cast iron, phosphatized
  ・b(mm): 78, 98
  ・d1(mm):12, 16
  ・d2(mm): M12, M16

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,340.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Fixed Drilling Supports

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・System: L12
  
  Fixed Drilling Supports · fix EH 1162.000 - EH 1162.300

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	105.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Fixed Drilling Supports, adjustable

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・System: L12
  
  Fixed Drilling Supports, adjustable EH 1163.000 - EH 1163.300

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	264.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stops / Steel, blackened / L12, L16, V40

  HALDER

  [Specifications]
  ・Material: Steel, blackened
  ・d1(mm): M8, M12
  ・System: L12, L16, V40
  
  T-Slot Systems Mounting Elements, Stops EH 1014.500-EH 1114.500

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stops, cylindrical

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・System: L12, L16, V70
  
  Stops, cylindrical.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	93.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Floating Clamps, compact construction, separate clamping and locking M 12

  HALDER

  Floating clamps with separate clamp and locking are used to clamp and support
  additional clamping points
  on extremly pliable
  workpieces. Both, clamping and supporting force can individually be designed.
  The benefits of the floating clamp are:
  avoids vibration during the processing. clamps ribs, beads and shackles to reinforce clamped components. distortion-free clamping of raw parts. compact version with reduced height.

  Select to compare

  Configure now
  Starting from∗ ：	1,131.01 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Gripper Studs

  HALDER

  Gripper stud for universal gripper set (Art. No. 1702.600).

  Select to compare

  Configure now
  Starting from∗ ：	35.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs, four-point

  HALDER

  For clamping unmachined parts. For soft materials such as aluminium. Least possible lost clamping margin. Clamping height approx. 4.5 mm to 6.0 mm.

  Select to compare

  Configure now
  Starting from∗ ：	71.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs, low

  HALDER

  For clamping unmachined parts. Least possible lost clamping margin. Clamping height: adjustable from 3.0 to 4.5 mm.

  Select to compare

  Configure now
  Starting from∗ ：	56.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs, round

  HALDER

  For clamping unmachined parts. For drilling through close to the edge. Offers 6 mm clear space under the workpiece.

  Select to compare

  Configure now
  Starting from∗ ：	54.74 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Gripper Studs, smooth

  HALDER

  With carbide coating for clamping pre-machined or hardened workpieces.

  Select to compare

  Configure now
  Starting from∗ ：	63.23 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Insertable Plates

  HALDER

  Three support heights. For levelling the workpiece on the five-sided machining jaws. Ground to high accuracy. Supplied without M 6 x 8 mm mounting screws (Art. No. 1704.600). This product is supplied as a pair.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	176.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Intermediate Elements

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・System: V70
  
  Intermediate Elements.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	378.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Intermediate Plates / Steel, case-hardened, ground / V70

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・h(mm): 20, 30
  ・System: V70
  
  T-Slot Systems Mounting Elements, Intermediate Plates EH 1111.700-EH 1111.800

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	352.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Intermediate Plates / Steel, case-hardened, ground / V40, V70

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・d1(mm): 40, 56
  ・System: V40, V70
  
  T-Slot Systems Mounting Elements, Intermediate Plates EH 1047.700-EH 1147.700

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	140.94 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Jaws for Five-Sided Machining Sets

  HALDER

  Pull-down elements suitable for clamping and pulling unmachined clamping surfaces down onto the guideway or onto the 90-mm support plates supplied. This way workpieces can be clamped almost exactly parallel to the guideway for machining. The direct contact to the support plates largely reduces vibrations in the workpiece.
  Supplied in handycase consisting of:
  4 x wedge adapters for five-sided machining jaw (Art. No. 1704.410)
  4 x wedge elements, four-point (Art. No. 1703.340)
  4 x wedge elements, Microgripper (Art. No. 1703.350)
  2 x insertable plates (h1=90 mm) (Art. No. 1704.520)
  20 x cheese-head screws M 6 x 8 (Art. No. 1704.600)

  Select to compare

  Configure now
  Starting from∗ ：	1,436.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...