Base（Page 2）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Upward / Downward Micro Movement Rod Stand

SURUGA SEIKI

[Features]
· A rod stand capable of upward and downward micro movements.
· After fixing the rod with the rod fixing knob, the rod can be moved upward and downward in fine increments by rotating the knurled adjustment knob.
· After adjusting, fix using the vertical fixing clamps.
· The range for micro movements is 10 mm.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	136.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Intermediate Ring

SURUGA SEIKI

A part used for rod stands. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	21.23 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Positioning Plate

SURUGA SEIKI

A positioning plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	41.19 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carrier for Optical Benches

SURUGA SEIKI

A carrier for the A10.

[Features]
· A carrier for optical benches.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	108.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Base for Optical Circuit Switching

SURUGA SEIKI

[Features]
· Can be used for switching optical circuits by loading and sliding the Opt Station holder (reproducibility reference value: 10 seconds or so).
· The slide-position is fixed by magnet. As such there is no locking mechanism.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	209.19 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Spacer □ 40 for Optical Axis Height Alignment

SURUGA SEIKI

[Features]
· A 40 mm spacer for aligning the optical axis.
· Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc.
· Features external dimensions of 40 × 40 mm. Can be used for 40 stages or Opt Station holders.
· Available in dimensions of 10 mm to 50 mm in increments of 5 mm (by combining spacers).
· More detailed adjustment is possible by using combinations of A50-H, R, J, V, W, X, and Y.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	26.22 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spacer □ 60 for Optical Axis Height Alignment

SURUGA SEIKI

A spacer for aligning the optical axis. Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	26.38 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Rotation Type (Handle Type) Cross Clamp

SURUGA SEIKI

[Features]
· A cross clamp for heavy loads.
· Poles and rods can be rotated to any angle and then fixed.
· Fixing is done using a split clamping method.
· Features a slitted fixing section. Twist the clamp section to securely fix the object.
· There are three types available for different combinations of applicable diameters.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	136.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Rotation Type (Hexagonal Type) Cross Clamp

SURUGA SEIKI

[Features]
· A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
· Poles and rods can be rotated to any angle and then fixed.
· Fixing is done using a split clamping method.
· Fixing is done by tightening the M5 bolts.
· Features a slitted fixing section. Twist the clamp section to securely fix the object.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	124.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Fixed Type (Handle Type) Cross Clamp

SURUGA SEIKI

[Features]
· A cross clamp for heavy loads.
· Poles or rods can be orthogonally connected.
· Fixing is done using split clamping.
· Features a slitted fixing section. Twist the clamp section to securely fix the object.
· There are three types available for different combinations of applicable diameters.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	109.17 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Fixed Type Cross Clamp

SURUGA SEIKI

A cross clamp for orthogonally connecting poles or rods. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	38.56 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Adapter Plate

SURUGA SEIKI

An adapter plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	27.19 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Conversion Adapter

CHUO PRECISION INDUSTRIAL

The adapter is used for conversions when using shafts or poles of the same thread diameter but different pitches etc.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	33.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Conversion Spacer

CHUO PRECISION INDUSTRIAL

Spacers use a M16P1 screw on the stage, and are for using M6 counterbore holes in an M4 counterbore hole.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Lever Type Magnet Stand

CHUO PRECISION INDUSTRIAL

[Features]
· A magnet stand that attaches using magnets.
· For switching attraction (magnetic force) between ON and OFF, rotate or slide the lever.
· The center section features M6 tapped holes and a single M16P1 tapped hole. These can be used for mounting a variety of stands.
· Stages can be mounted using the M2 or M4 tapped holes.
· The value of the attraction force is for a polished surface.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	132.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Base Plate

CHUO PRECISION INDUSTRIAL

[Features]
· Used for mounting stages, holders, poles, and other similar items to surface plates with M6 tapped holes.
· Base plate fixing screws (S-05) can be used for fixing to the surface plate.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	40.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Base Retainer

CHUO PRECISION INDUSTRIAL

[Features]
· Used for mounting stages, holders, poles, and other similar items to surface plates with M6 tapped holes.
· Use the M16P1 screw to mount the stands such as the ES-12/ES-20. The stage can be mounted using M4 screws.
· A base plate fixing screw (S-05) can be used for fixing to surface plates.
· BH-1 can fix base plates in any direction.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	33.80 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Base Plate Fixing Screw

Base Plate Fixing Screw【10 Pieces Per Package】

CHUO PRECISION INDUSTRIAL

[Features]
· Can be used for fixing to surface plates.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	36.94 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Shaft for Cameras 1 / 4 Inch

CHUO PRECISION INDUSTRIAL

[Features]
· A stainless steel shaft with a diameter of ø20 mm and tripod screw (nominal size 1/4").

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	30.07 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stand ø12

CHUO PRECISION INDUSTRIAL

[Features]
· Fixes the shaft of various holders such as a mirror holder.
· Each fixing height (depth) is available for all shaft diameters (ø8 mm, ø12 mm, and ø20 mm).
· Clamp screws are used to fix the shaft. Can be fixed in any direction from any of the three points.
· Equipped as standard with a collar (thickness: 10 mm) which can be used for changing direction while maintaining a fixed height.
· Clamp screws are provided in two locations (top and bottom) for products with an overall length of 80 mm or more. This helps increase the holding strength.

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	37.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pole ø20

CHUO PRECISION INDUSTRIAL

[Features]
· An extendable, non-magnetic stainless steel pole with a male thread and tapped holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.37 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Universal Arm

CHUO PRECISION INDUSTRIAL

[Features]
· Each axis can be simultaneously moved in any direction using the handle, and fixed.
· Even more handy when used in combination using the M16P1 tapped hole on the magnet stand.
· There are products with ø8 mm, ø12 mm, and ø20 mm holder parts, and products with movable ranges of 0 to 46 mm.

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	235.69 €
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Angle connector clamps

GANTER

The clamping bores of the angle connector clamps GN 196 are specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	61.18 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Flanged two-way connector clamps, multi part assembly

GANTER

The clamping bores of the flanged two-way connector clamps GN 141 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.

The square designs are also suitable for use in profile systems.
Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.

The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	48.34 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Linear actuator connectors / Aluminium / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912

GANTER

Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	47.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Linear actuator connectors / Aluminium / GN 134.1 / 2, with 4 Stainless Steel-clamping screws DIN 912

GANTER

GN 134.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	88.80 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Linear actuator connectors / Aluminium / GN 135.1 / 2, with 4 Stainless Steel-clamping screws DIN 912

GANTER

GN 135.1 Linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	121.54 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Linear Actuator Connectors / NI, Stainless Steel / GN 131.1 / 2, with 2 Stainless Steel-clamping screws DIN 912

GANTER

GN 131.1 Stainless Steel-Linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	134.84 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Linear Actuator Connectors / NI, Stainless Steel / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912

GANTER

Stainless Steel-Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	208.50 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

T-angle connector clamps / Aluminium / GN 193 / 2, with 4 Stainless Steel-clamping screws DIN 912

GANTER

The clamping bores of GN 193 T-angle connector clamps are not machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.

Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	37.24 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

T-angle connector clamps / Aluminium / GN 194 / 2, with 4 Stainless Steel-clamping screws DIN 912

GANTER

The clamping bores of GN 194 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.
Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.

The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	42.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

T-angle connector clamps / Aluminium / GN 195 / 2, with 6 Stainless Steel-clamping screws DIN 912

GANTER

The clamping bores of GN 195 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The versions with square bores are also suitable for profile systems.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	61.98 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

T-angle linear actuator connectors, Aluminium

GANTER

T-angle linear actuator connectors GN 191.1 are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	47.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

T-angle linear actuator connectors, Stainless Steel

GANTER

GN 191.1 Stainless Steel-T-angle linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	133.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Two-way connector clamps / Aluminium / GN 133 / 2, with 2 Stainless Steel-clamping screws DIN 912

GANTER

The clamping bores of GN 133 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.64 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	SURUGA SEIKI	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	CHUO PRECISION INDUSTRIAL	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER	GANTER
Product Series	Upward / Downward Micro Movement Rod Stand	Intermediate Ring	Positioning Plate	Carrier for Optical Benches	Base for Optical Circuit Switching	Spacer □ 40 for Optical Axis Height Alignment	Spacer □ 60 for Optical Axis Height Alignment	Rotation Type (Handle Type) Cross Clamp	Rotation Type (Hexagonal Type) Cross Clamp	Fixed Type (Handle Type) Cross Clamp	Fixed Type Cross Clamp	Adapter Plate	Conversion Adapter	Conversion Spacer	Lever Type Magnet Stand	Base Plate	Base Retainer	Base Plate Fixing Screw【10 Pieces Per Package】	Shaft for Cameras 1 / 4 Inch	Stand ø12	Pole ø20	Universal Arm	Angle connector clamps	Flanged two-way connector clamps, multi part assembly	Linear actuator connectors / Aluminium / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912	Linear actuator connectors / Aluminium / GN 134.1 / 2, with 4 Stainless Steel-clamping screws DIN 912	Linear actuator connectors / Aluminium / GN 135.1 / 2, with 4 Stainless Steel-clamping screws DIN 912	Linear Actuator Connectors / NI, Stainless Steel / GN 131.1 / 2, with 2 Stainless Steel-clamping screws DIN 912	Linear Actuator Connectors / NI, Stainless Steel / GN 131.2 / 2, with 2 Stainless Steel-clamping screws DIN 912	T-angle connector clamps / Aluminium / GN 193 / 2, with 4 Stainless Steel-clamping screws DIN 912	T-angle connector clamps / Aluminium / GN 194 / 2, with 4 Stainless Steel-clamping screws DIN 912	T-angle connector clamps / Aluminium / GN 195 / 2, with 6 Stainless Steel-clamping screws DIN 912	T-angle linear actuator connectors, Aluminium	T-angle linear actuator connectors, Stainless Steel	Two-way connector clamps / Aluminium / GN 133 / 2, with 2 Stainless Steel-clamping screws DIN 912
CAD	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D	2D		2D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	136.79 € *Unit price with basic configuration	21.23 € *Unit price with basic configuration Volume Discount	41.19 € *Unit price with basic configuration Volume Discount	108.42 € *Unit price with basic configuration	209.19 € *Unit price with basic configuration	26.22 € *Unit price with basic configuration Volume Discount	26.38 € *Unit price with basic configuration Volume Discount	136.55 € *Unit price with basic configuration	124.60 € *Unit price with basic configuration	109.17 € *Unit price with basic configuration	38.56 € *Unit price with basic configuration	27.19 € *Unit price with basic configuration Volume Discount	33.54 € *Unit price with basic configuration Volume Discount	40.34 € *Unit price with basic configuration Volume Discount	132.67 € *Unit price with basic configuration Volume Discount	40.46 € *Unit price with basic configuration Volume Discount	33.80 € *Unit price with basic configuration	36.94 € *Unit price with basic configuration	30.07 € Special price *Unit price with basic configuration Promotional pricing	37.74 € *Unit price with basic configuration Volume Discount	35.37 € *Unit price with basic configuration Volume Discount	235.69 € *Unit price with basic configuration	61.18 € *Unit price with basic configuration Volume Discount	48.34 € *Unit price with basic configuration Volume Discount	47.66 € *Unit price with basic configuration Volume Discount	88.80 € *Unit price with basic configuration Volume Discount	121.54 € *Unit price with basic configuration Volume Discount	134.84 € *Unit price with basic configuration Volume Discount	208.50 € *Unit price with basic configuration Volume Discount	37.24 € *Unit price with basic configuration Volume Discount	42.60 € *Unit price with basic configuration Volume Discount	61.98 € *Unit price with basic configuration Volume Discount	47.32 € *Unit price with basic configuration Volume Discount	133.42 € *Unit price with basic configuration Volume Discount	25.64 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	5 Days	5 Days	5 Days	9 Days	5 Days	5 Days	5 Days	5 Days	9 Days	5 Days	5 Days	5 Days	5 Days	6 Days	5 Days	5 Days	8 Days	Same day	5 Days	5 Days	15 Days	7 Days	7 Days	7 Days	5 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	3 Days