V Belt（Page 2）

?* Information on days to ship and prices

• 

  V-belts DIN 7753 (22071-02)

  NORELEM

  · Antistatic
  
  · Endless design
  
  · With polyester tension cords
  
  · Equal length
  
  · More efficient than classic V-belts.

  Select to compare

  Configure now
  Starting from∗ ：	9.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Red Label V-Belt, B Type

  MITSUBOSHI BELTING

  [Features]
  · The most popular belt for power transmission.
  · Economical, readily available and easy to replace.
  · Belt with good dimensional stability, "set-free" effective for multi-runners.
  · A high-load transmission belt with excellent heat resistance, oil resistance and flexibility as well as anti-static properties.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Energy Saving Red (A Type)

  BANDO

  V-belt allows for reduction of power of factory equipment. Pulley replacement is not required.

  Select to compare

  Configure now
  Starting from∗ ：	23.25 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile SPC

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 22
  ・Height(mm): 18
  ・Standard: DIN 7753
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	44.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Narrow V-Belt - Profile XPB / 5VX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 16.3
  ・Height(mm): 13
  ・Standard: DIN 7753
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Select to compare

  Configure now
  Starting from∗ ：	19.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile SPB

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 15.6
  ・Rib spacing(mm): 19
  ・Standard: DIN 7753
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Select to compare

  Configure now
  Starting from∗ ：	151.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 10 / Z

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 10
  ・Height(mm): 6
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	6.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Power Twist Plus

  CONCAR

  [Specifications]
  ・Type: without metal rivets
  ・Material: Polyurethane with fabric inserts
  ・Colour: Red
  ・Roll length(m): 10 or 2 (short length)
  
  Link belts are the ideal solution for areas of use under difficult conditions. Power Twist Plus (red), Nu-T-Link (orange) and Super-T-Link (blue) are available in rolls by length; the surcharge for cutting to length is 10 %. In some cases, short lengths are also available.

  Select to compare

  Configure now
  Starting from∗ ：	52.94 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Twin V-Belt - Profile AA

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 10
  ・Standard: DIN 7722
  
  ConCar Double V-belts are used mainly with agricultural machinery. Due to the edge angles on both sides, several pulleys can be driven in the counter-direction in one drive system. The reference lengths given correspond to the average length.

  Select to compare

  Configure now
  Starting from∗ ：	35.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11M, Single Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11M, Single Belt

  Select to compare

  Configure now
  Starting from∗ ：	55.46 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 5MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 5
  ・Height(mm): 3
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 5MS, Composite Belt

  Select to compare

  Configure now
  Starting from∗ ：	49.71 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 7MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 7
  ・Height(mm): 5
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 5MS, Composite Belt
  ・Wide Belt - Profile 7MS, Composite Belt

  Select to compare

  Configure now
  Starting from∗ ：	70.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Power Belt, Polyflex

  GATES

  · Design freedom and space savings which are not possible with conventional rubber construction belts
  · Low maintenance cost as belt needs less re-tensioning
  · Long belt life on compact drives
  · Available on demand as Matched sets. Contact Customer Service for details
  · Temperature range: -54°C up to +85°C

  Select to compare

  Configure now
  Starting from∗ ：	43.03 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Powerband, Quad-Power II

  GATES

  · Energy efficiencies up to 98%
  · Less downtime
  · Fewer replacements
  · Higher performance
  · Wider temperature range
  · Halogen-free belt
  · A clear branding for ease of identification
  · Perfect fit on standard ISO/DIN V-pulleys and 3VX/5VX for RMA pulley grooves
  · REACH and RoHS 2 compliant
  · Static conductive (ISO 1813) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · Temperature range: -50°C to +130°C

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	26.00 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Powerband, Super HC

  GATES

  · Excellent performance/cost ratio
  · More compact design compared to classical section V-belts
  · Cost and space savings by reducing size of pulleys, bearings, guards and mounts
  · Improved belt life reducing expensive maintenance time
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.32 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt / Mixture of Elastomer / Length 425-10672mm

  GATES

  · Excellent performance/cost ratio
  · Reliability and efficiency
  · Long belt life reducing replacement and maintenance costs
  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.72 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, FO Pioneer

  CONTITECH

  [Specifications]
  ・Material: Mixture of elastomer
  ・FO Pioneer
  ・Height(mm): 8, 9, 13
  ・Width(mm): 9.7, 12.7, 16.3

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.57 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  V-Belt / Hi-Power / Mixture of Elastomer

  CONTITECH

  [Specifications]
  ・Material: Mixture of elastomer
  ・Length(mm): 2438
  ・Height(mm): 14

  Select to compare

  Configure now
  Starting from∗ ：	48.02 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  e-POWER WEDGE, 5V Type

  MITSUBOSHI BELTING

  V-belt with unique narrow shape and energy-saving effect. Notch shape for excellent flexibility and reduced power consumption.

  Select to compare

  Configure now
  Starting from∗ ：	63.79 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  e-POWER Belt, Wrapped Notch C Type

  MITSUBOSHI BELTING

  Excellent bend tolerance. Less power loss due to bending compared to conventional standard V-belts results in energy-saving effect.

  Select to compare

  Configure now
  Starting from∗ ：	77.33 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  e-POWER Belt, Raw Edge Cogged AX Type

  MITSUBOSHI BELTING

  Excellent bend tolerance. Less power loss due to bending compared to conventional standard V-belts results in energy-saving effect.

  Select to compare

  Configure now
  Starting from∗ ：	22.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Maxstar Multi-Wedge V-Belt, 3V Type

  MITSUBOSHI BELTING

  Unique V-belt with narrow shape and high transmission capabilities. Saves energy, enables compact design. Excellent heat resistance and static electricity prevention.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	45.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V-Belt Standard (D Type)

  BANDO

  The most versatile belt.

  Select to compare

  Configure now
  Starting from∗ ：	81.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-Belt Red (M Type)

  BANDO

  Uses synthetic rubber for excellent heat and oil resistance. With antistatic performance.
  
  [Features]
  · Low cost per horsepower transmission
  · Widely available.
  · Easy handling.
  · Approximately 60% power-up compared to standard, employing powerful, low elongation polyester cord and special synthetic rubber formulation.
  · Electrical resistance (anti-static performance) is 0.05 to 0.2 MΩ (within the V-belt 216 mm), and US RMA standard approved (rated 6 MΩ or less).
  · Excellent heat, oil and chemical resistance, with flame retardancy.

  Select to compare

  Configure now
  Starting from∗ ：	14.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Energy Saving Power Ace (5V)

  BANDO

  V-belt allows for reduction of power of factory equipment. Narrow width V-belt type can save energy.
  
  [Features]
  · Reduce torque loss and improve transmission efficiency.
  · Allows energy saving & CO2 reduction.
  · Changing of pulleys not necessary, and can be used by just changing the belt.
  · Reduction in belt bending rigidity and suppression of self-heating achieved, for stable lifetime performance exceeding power ace.

  Select to compare

  Configure now
  Starting from∗ ：	79.27 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  V-Belt Red (A Type)

  BANDO

  Uses synthetic rubber for excellent heat and oil resistance. With antistatic performance.
  
  [Features]
  · Low cost per horsepower transmission
  · Commercially available.
  · Easy handling.
  · Powerful, low elongation polyester cord employed, with special synthetic rubber formulation, giving power increase of about 60% compared to standard.
  · Electrical resistance (anti-static performance) is 0.05 to 0.2 MΩ (within the V-belt 216 mm), and US RMA standard approved (rated 6 MΩ or less) flame retardant, with excellent heat, oil, and chemical-resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile 3V / 9J

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 9.9
  ・Rib spacing(mm): 10.3
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Select to compare

  Configure now
  Starting from∗ ：	42.86 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar Power Belt - Profile 5V / 15J

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 15.1
  ・Rib spacing(mm): 17.5
  
  Banded belts consist of several V-belts which are connected to each other via a resilient tie band. The individual belts in the banded belt have the same length and cannot expand in different ways. The connection prevents the belts from twisting sideways or jumping out of the pulley. A banded belt stands out particularly for its even, highly stable power transfer and because it compensates for vibrations and oscillations. For this reason, banded belts are frequently used for drives with particularly high impulse or impact loads. ConCar maintains one of the largest band belt warehouses in Europe.

  Select to compare

  Configure now
  Starting from∗ ：	99.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 17 / B

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 17
  ・Height(mm): 11
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	8.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile 32 / D

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 32
  ・Height(mm): 20
  ・Standard: DIN 2215
  
  The wrapped V-belts also include classic V-belts and narrow V-belts in equal measure. Both belt types are positive engagement, trapezoid drive belts made of neoprene with textile wrapping and polyester cord, the force of which is transferred in the edges. Narrow V-belts are, as their name suggests, somewhat narrower, but transfer more power via the edge, since they are higher than classic V-belts. They are mainly used in mechanical engineering.

  Select to compare

  Configure now
  Starting from∗ ：	69.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  ConCar V-Belt - Profile X13 / AX

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 13
  ・Height(mm): 8
  ・Standard: DIN 2215
  
  Raw edge, moulded cogged V-belts (REC) are available - like the wrapped V-belts - as classic V-belts or narrow V-belts. Both belt types are positive engagement, trapezoid drive belts made of neoprene, the force of which is transferred in the edges. Unlike the wrapped V-belts, the raw edge, moulded cogged V-belts have no textile wrapping, but are cogged. Raw edge, moulded cogged ConCar V-belts are delivered as non-varying sets and are used in mechanical engineering, for example.

  Select to compare

  Configure now
  Starting from∗ ：	8.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  PU V-Belt - VLW

  CONCAR

  [Specifications]
  ・Type: not serrated
  ・Material: Polyurethane
  ・Shore hardness(°): 80 Shore A
  ・Colour: Blue
  
  With its large selection of PU V-belts, ConCar offers solution options for all sectors for your conveyance and transport applications. PU V-belts are available in many different profiles, hardness degrees (colours), with and without tension members, and are largely FDA / USDA approved. The range is rounded off by corresponding welding tools, with which you can easily weld these belts. The tools are also available individually.
  ・PU V-Belt - VLW

  Select to compare

  Configure now
  Min. Shipping Days ：	3 Days

• 

  Twin V-Belt - Profile BB

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 17
  ・Height(mm): 13
  ・Standard: DIN 7722
  
  ConCar Double V-belts are used mainly with agricultural machinery. Due to the edge angles on both sides, several pulleys can be driven in the counter-direction in one drive system. The reference lengths given correspond to the average length.

  Select to compare

  Configure now
  Starting from∗ ：	43.35 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Twin V-Belt - Profile CC

  CONCAR

  [Specifications]
  ・Type: sheathed
  ・Material: Neoprene
  ・Width(mm): 22
  ・Height(mm): 17
  ・Standard: DIN 7722
  
  ConCar Double V-belts are used mainly with agricultural machinery. Due to the edge angles on both sides, several pulleys can be driven in the counter-direction in one drive system. The reference lengths given correspond to the average length.

  Select to compare

  Configure now
  Starting from∗ ：	92.48 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Belt - Profile 29,5 x 7

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 29.5
  ・Height(mm): 7
  ・Angle(°): 28
  ・Standard: DIN 7719 / ISO 1604
  
  ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

  Select to compare

  Configure now
  Starting from∗ ：	53.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Belt - Profile 41 x 13

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 41
  ・Height(mm): 13
  ・Angle(°): 27
  ・Standard: DIN 7719 / ISO 1604
  
  ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

  Select to compare

  Configure now
  Starting from∗ ：	73.92 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Belt - Profile 47 x 13

  CONCAR

  [Specifications]
  ・Type: open-edge, serrated
  ・Material: Neoprene
  ・Width(mm): 47
  ・Height(mm): 13
  ・Angle(°): 28
  ・Standard: DIN 7719 / ISO 1604
  
  ConCar Vari-Speed variable speed belts are used for high-level force transmission in continuous variable-speed gears. Structured as an open-flank, moulded cogged V-belt with an additional fibre-reinforced elastomer layer, a variable speed belt ensures high stability and increases transverse rigidity. Due to the change in the pulley width, a continuous speed regulation of the drive is possible. ConCar can cut standard variable speed belts to a required width (from approx. 1-2 mm possible). The flank angle required can be set accordingly during cutting with a tolerance of +/- 1 degree. Cutting to size: +20 % added charge

  Select to compare

  Configure now
  Starting from∗ ：	79.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile JPU

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Height(mm): 3.5
  ・Rib spacing(mm): 2.34
  
  Ribbed belts – also known as Poly-V belts – are a mixture consisting of flat belts and V-belts, and combine the advantages of both. Essentially, this combination produces the flexibility of a flat belt and the favourable power transfer of a V-belt.

  Select to compare

  Configure now
  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  V-Ribbed Belt - Profile PH

  CONCAR

  [Specifications]
  ・Material: Neoprene
  ・Height(mm): 3
  ・Rib spacing(mm): 1.6
  ・Standard: DIN 7867

  Select to compare

  Configure now
  Starting from∗ ：	15.34 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Wide Belt - Profile 11MS, Composite Belt

  CONCAR

  [Specifications]
  ・Material: Polyurethane
  ・Width(mm): 11
  ・Height(mm): 7
  ・Angle(°): 60
  
  Wide angle belts are available as individual or combined belts. The low dead weight of these PU belts enables very high belt speeds of up to 60 m/sec. Wide angle belts are resilient against wear, are oil- and ozone-resistant and can withstand numerous different chemicals. The banded belt has very quiet running, and vibrations caused by impact loads or high axial intervals are absorbed.
  ・Wide Belt - Profile 11MS, Composite Belt

  Select to compare

  Configure now
  Starting from∗ ：	113.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Variable speed belt RP Series / ISO 1813

  OPTIBELT

  · Maintenance-free
  · Powerful
  · Cost-effective
  · S=C Plus usable in sets
  · Environmentally friendly
  · Electrically conductive according to ISO 1813
  · Oil-resistant
  · Heat-resistant
  · Dust-protected as standard

  Select to compare

  Configure now
  Starting from∗ ：	206.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  V Belt RP Series

  OPTIBELT

  · Maintenance-free
  · Powerful
  · Cost-effective
  · S=C Plus usable in sets
  · Environmentally friendly
  · Electrically conductive according to ISO 1813
  · Oil-resistant
  · Heat-resistant
  · Dust-protected as standard

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Delta Narrow, V-belt

  GATES

  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · Excellent price/performance ratio
  · Trusted Gates quality that equals peace of mind
  · Made to run in all your standard industry drives
  · REACH and RoHS 2 compliant
  · Available in all popular sections and belt lengths
  · Specified to operate in a temperature range from -30°C to +70°C

  Select to compare

  Configure now
  Starting from∗ ：	57.25 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, Delta

  GATES

  · Match system: all sizes meet Gates UNISET tolerances, they can be installed without matching
  · Excellent price/performance ratio
  · Trusted Gates quality that equals peace of mind
  · Made to run in all your standard industry drives
  · REACH and RoHS 2 compliant
  · Available in all popular sections and belt lengths
  · Specified to operate in a temperature range from -30°C to +70°C

  Select to compare

  Configure now
  Starting from∗ ：	31.77 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  V-belt, Predator

  GATES

  · At least 40% higher power ratings than standard construction V-belts
  · No need for constant belt re-tensioning: less maintenance, less downtime
  · Excellent problem solver
  · Static conductive (ISO 1813 - with the exception of 8VP) and can as such be used in the conditions described in the Directive 2014/34/EU- ATEX
  · Available on demand in Matched sets. Contact Customer Service for details
  · REACH and RoHS 2 compliant
  · Temperature range: -30°C to +60°C

  Select to compare

  Configure now
  Starting from∗ ：	49.92 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

Loading...