Cod piesă:
candidați nedefiniți.
Type | Material | Hardness | Surface Treatment | |||||
One End Stepped and Threaded | Both Ends Stepped and Threaded | |||||||
D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
SFAF | SFUF | - | SFAX | SFUX | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~ | - |
SSFAF | SSFUF | - | SSFAX | SSFUX | - | EN 1.4037 Equiv. | ||
PSFAF | PSFUF | - | PSFAX | PSFUX | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More ~ | |
PSSFAF | PSSFUF | - | PSSFAX | PSSFUX | - | EN 1.4037 Equiv. | ||
RSFAF | - | - | RSFAX | - | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PSFGF | - | - | PSFGX | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More ~ |
- | - | PSSFGF | - | - | PSSFGX | EN 1.4301 Equiv. |
Part Number | 1mm Increment | M (Coarse) | D Tol. | (Y)Max. | R | C | ||||||||||||||
Type | D | L | F | B | P | g6 | h5 | f8 | ||||||||||||
One End Stepped and Threaded (D Tolerance g6) SFAF SSFAF PSFAF PSSFAF (D Tolerance f8) PSFGF PSSFGF | (D Tolerance h5) SFUF SSFUF PSFUF PSSFUF | 8 | 25~790 | 10≤F≤Px5 | Pitchx3+(g)≤B≤Mx3 | M<P<D | 6 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.3 or Less | 0.5 or Less | |||||||
10 | 25~790 | 6 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.3 or Less | 0.5 or Less | |||||||||||
12 | 25~990 | 6 | 8 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||||
13 | 25~990 | 6 | 8 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||||
15 | 25~990 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | |||||||||
16 | 25~1190 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.3 or Less | 0.5 or Less | |||||||||
18 | 25~1190 | 6 | 8 | 10 | 12 | 16 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.3 or Less | 0.5 or Less | ||||||||
20 | 25~1190 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 0.3 or Less | 1.0 or Less | ||||||||
25 | 25~1190 | 8 | 10 | 12 | 16 | 20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 0.3 or Less | 1.0 or Less | ||||||||
30 | 25~1490 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1500 | 0.3 or Less | 1.0 or Less | |||||||
35 | 25~1480 | 20≤F≤Px5 | 10 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less | ||||||
40 | 25~1480 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less | ||||||||
50 | 25~1480 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less |
Part Number | 1mm Increment | M (Coarse), N (Coarse) Selection | D Tol. | (Y)Max. | R | C | ||||||||||||||
Type | D | L | F, T | B, S | P, Q | g6 | h5 | f8 | ||||||||||||
Both Ends Stepped and Threaded (D Tolerance g6) SFAX SSFAX PSFAX PSSFAX (D Tolerance f8) PSFGX PSSFGX | (D Tolerance h5) SFUX SSFUX PSFUX PSSFUX | 8 | 25~790 | 10≤F≤Px5 10≤T≤Qx5 | Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3 | M<P<D N<Q<D | 6 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.3 or Less | 0.5 or Less | |||||||
10 | 25~790 | 6 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.3 or Less | 0.5 or Less | |||||||||||
12 | 25~990 | 6 | 8 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||||
13 | 25~990 | 6 | 8 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||||
15 | 25~990 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | |||||||||
16 | 25~1190 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.3 or Less | 0.5 or Less | |||||||||
18 | 25~1190 | 6 | 8 | 10 | 12 | 16 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.3 or Less | 0.5 or Less | ||||||||
20 | 25~1190 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 0.3 or Less | 1.0 or Less | ||||||||
25 | 25~1190 | 8 | 10 | 12 | 16 | 20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 0.3 or Less | 1.0 or Less | ||||||||
30 | 25~1490 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1500 | 0.3 or Less | 1.0 or Less | |||||||
35 | 25~1480 | 20≤F≤Px5 20≤T≤Qx5 | 10 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less | ||||||
40 | 25~1480 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less | ||||||||
50 | 25~1480 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less |
Part Number | 1mm Increment | M (Coarse) | D Tol. | (Y)Max. | R | C | ||||||||||
Type | D | L | F | B | P | g6 | ||||||||||
One End Stepped and Threaded (D Tolerance g6) LTBC Plating RSFAF (Ymax≤800) | 8 | 25~500 | 10≤F≤Px5 | Pitchx3+(g)≤B≤Mx3 | M<P<D | 6 | -0.005 -0.014 | 800 | 0.3 or Less | 0.5 or Less | ||||||
10 | 25~500 | 6 | 8 | -0.005 -0.014 | 800 | 0.3 or Less | 0.5 or Less | |||||||||
12 | 25~500 | 6 | 8 | 10 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||
13 | 25~500 | 6 | 8 | 10 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||
15 | 25~500 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | |||||||
16 | 25~500 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 1200 | 0.3 or Less | 0.5 or Less | |||||||
18 | 25~500 | 6 | 8 | 10 | 12 | 16 | -0.006 -0.017 | 1200 | 0.3 or Less | 0.5 or Less | ||||||
20 | 25~500 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 1200 | 0.3 or Less | 1.0 or Less | ||||||
25 | 25~500 | 8 | 10 | 12 | 16 | 20 | -0.007 -0.020 | 1200 | 0.3 or Less | 1.0 or Less | ||||||
30 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 1500 | 0.3 or Less | 1.0 or Less |
Part Number | 1mm Increment | M (Coarse), N (Coarse) Selection | D Tol. | (Y)Max. | R | C | ||||||||||
Type | D | L | F, T | B, S | P, Q | g6 | ||||||||||
Both Ends Stepped and Threaded (D Tolerance g6) LTBC Plating RSFAX (Ymax≤800) | 8 | 25~500 | 10≤F≤Px5 10≤T≤Qx5 | Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3 | M<P<D N<Q<D | 6 | -0.005 -0.014 | 800 | 0.3 or Less | 0.5 or Less | ||||||
10 | 25~500 | 6 | 8 | -0.005 -0.014 | 800 | 0.3 or Less | 0.5 or Less | |||||||||
12 | 25~500 | 6 | 8 | 10 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||
13 | 25~500 | 6 | 8 | 10 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||
15 | 25~500 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | |||||||
16 | 25~500 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 1200 | 0.3 or Less | 0.5 or Less | |||||||
18 | 25~500 | 6 | 8 | 10 | 12 | 16 | -0.006 -0.017 | 1200 | 0.3 or Less | 0.5 or Less | ||||||
20 | 25~500 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 1200 | 0.3 or Less | 1.0 or Less | ||||||
25 | 25~500 | 8 | 10 | 12 | 16 | 20 | -0.007 -0.020 | 1200 | 0.3 or Less | 1.0 or Less | ||||||
30 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 1500 | 0.3 or Less | 1.0 or Less |
Further specifications can be found under the tab More Information.
Part Number | - | L | - | F | - | B | - | P | - | M | - | T | - | S | - | Q | - | N |
SFAX20 | - | 400 | - | F30 | - | B20 | - | P10 | - | M8 | - | T20 | - | S15 | - | Q10 | - | N8 |
You find further options in detail under Option Overview.
Cod piesă |
---|
Preț unitar (fără TVA)(preț unitar cu TVA incluse) | Dată de expediere standard |
---|
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 4 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
- ( - ) | 7 zile lucrătoare |
Overview of the shaft designs as PDF
Coarse Thread Undercut Dimension | |||
M N | Pitch | MC NC | (g) |
6 | 1.0 | 4.4 | 2 |
8 | 1.25 | 6.0 | 3 |
10 | 1.5 | 7.7 | 3 |
12 | 1.75 | 9.4 | 4 |
16 | 2.0 | 13.0 | 4 |
20 | 2.5 | 16.4 | 5 |
24 | 3.0 | 19.6 | 5 |
30 | 3.5 | 25.0 | 5 |
You find further options in detail under Option Overview.