Înregistrați-vă

Categorie

Chamfer, V-Grooves

Criterii de filtrare

Ștergeți tot

Stoc
Afișați numai articolele din stoc

Application

Centering (Positioning)
Hole Chamfer
Chamfering/Horizontal
V Groove
Drilling

Tip angle (θ)

Tool Diameter (D)(mm)

work material

Aluminum

Single blade, two blades

Single blade

Tool Material Type

Carbide

Coating Y/N

Available
N/A

Coating Type

TiAlN
TiN

Producător

MAKOTOLOY (22)

MAKOTOLOY Chamfer, V-Grooves（work material：Aluminum）

22 articol(e)

* Informații privind zile de expediere, costurile de expediere și prețurile

Listă

Fotografie

Comparați specificațiile

Număr de articole afișate:Sortare după:

Data expedierii:


Producător
Numele gamei

Preț (fără TVA)
Dată de expediere normală
Application
Tip angle (θ)
Tool Diameter (D)(mm)
work material
Single blade, two blades
Peripheral Blade Y/N
Tool Material Type
Coating Y/N
Coating Type
R Size (R)(mm)

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

DISCOUNT

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

Carbide V Cut End Mill Long Type Coated Series AMVL 120°

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

V Spot Carbide Drill, Standard Type, TiN Coat, 90°

V Spot Carbide Drill, Standard Type, TiN Coat, 120°

V Spot Carbide Drill, Long Type, TiN Coat, 90°

V Spot Carbide Drill, Long Type, TiN Coat, 120°

MAKOTOLOY

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 120°

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 120°

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 60°

V-Cut Carbide End Mills, Long Type, Non-Coating Series MVL 90°

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

Carbide V Cut End Mill Long Type Coated Series AMVL 120°

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 60°

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 90°

V-Cut Small Diameter Carbide End Mills Non-Coating Series MVS 120°

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

V Spot Carbide Drill, Standard Type, TiN Coat, 90°

V Spot Carbide Drill, Standard Type, TiN Coat, 120°

V Spot Carbide Drill, Long Type, TiN Coat, 90°

V Spot Carbide Drill, Long Type, TiN Coat, 120°

93.69 €-

Preț special

110.87 €-

93.69 €-

125.71 €-

110.87 €-

134.27 €-

104.69 €-

118.22 €-

110.84 €-

145.35 €-

6 zile lucrătoare

Articol în stoc - 1 zi lucrătoare
Unele articole pot fi expediate în aceeași zi

8 zile lucrătoare

6 zile lucrătoare

8 zile lucrătoare